Mercury Recording Equipment Company
M76m Mk. IV
Dual Mono Tube Studio Microphone Amplifiers
The new Mercury M76m [Mk. IV] is the latest version of our benchmark Studio Microphone Amplifier. The M76m is based on one of the most sought after vintage amplifier modules, the Telefunken/Siemens V76m. These modules were used in european broadcast and recording studios in the late 1950s and 60s. Later, after tube consoles where out of favor and replaced by discrete, transistor consoles, the V76 modules still lived on and were racked as outboard mic amps and used in the studios around the world.
Inspired by the vintage tone, craftsmanship the M76m focuses on bringing back the sound, look and feel that inspired not only this product but this company to manufacture recording equipment and keep this and other beloved circuits alive to make more music for another generation. The new M76m [Mk. IV] was stripped of a few vintage inspired, aesthetic extras extras of previous versions but is still loaded with the same exact tone and warmth utilizing the same exact circuit, same quality parts and same transformers we have used since we started building the first M76m at Mercury Recording Equipment.
The Mercury M76m is based on the module used in consoles which are very rare due to a minimal amount made. These amplifier modules have not been available new for more than 50 years. So, working units have become extremely rare, very expensive and in some cases are now in need of much repair.
Drawing on 20+ years of experience repairing, rebuilding, and most importantly listening to the Telefunken/Siemens V76 modules it was our first priority to build a modern Studio Microphone Amplifier that sounds identical to the original. Mercury Recording Equipment Co. kept the integrity of the original circuit, the M76m has the same open, warm tonality created with the transformer balanced, dual stage, high gain amplifier, and uses four transformers and four tubes per channel.
We are confident we have built what is quite possibly the ultimate combination of vintage sound and modern features in a modern tube microphone amplifier. We feel we have captured not only how the units behave, but how they sound overall. With the addition normal modern features, such as: Phantom, Phase, as well as many new features such as: Level Control and a High/Low Impedance switch never available on any module, or even custom racked units, the Mercury M76m is the benchmark of modern tube microphone amplifiers.
“With its stellar sound, faithfulness to the original V76, unique tonal flexibility, and helpful array of modern conveniences, the M76m could very well be the ultimate ‘vintage-style’ mic preamp available today.”
We build these like the original master craftsman did and would if building them today. There is no compromise or corners cut. With four (4) Transformers & four (4) Tube PER CHANNEL. There are enough parts to build 4 Channels of high quality Microphone Amplifiers inside this unit. Mercury FDI Circuit, Custom USA Made Transformers, WIMA Caps, DALE military grade 1% resistors. Custom made Audio Foil cap. New, Toroidal PSU Transformer and updated PSU circuit. The Mercury M76m is not a clone, its an updated & improved version of the V76m and a benchmark in modern tube microphone amplifiers. 3U. 24lbs.
Features & Controls
The Mercury M76m Gain Control of 0 to +60dB in 6dB increments, works in conjunction with the Level Control and Output Attenuation. The Level Control, which will work as a fader, increasing (clockwise) and decreasing (counter clockwise) the amount of gain from the first stage to the second stage of the amplifier. This also allows you the ability to add musical (tube) "break up" by decreasing your level (control) and increasing the (course) gain. The Output Attenuation Control (-0 to -10dB) has been added for even more control, including the ability shape tones in several different ways, if desired, which works well on electric guitar recordings. We have also added an Impedance Select Switch for both high and low impedance devices, as well as all the staple features one expects from a modern piece of equipment were added. Phantom Power (on/off) , Phase (Polarity) Reversal, and our amazing sounding F.D.I. (FET Direct Input) Circuit.
The Mercury FDI (FET Direct Input), a proprietary J-Fet circuit, based on a class-A tube topology. The Mercury FDI is designed to reproduce every nuance of a direct recording, while the circuit lets the tube or solid-state character of the amplifier determine the overall tone. The instrument DI signal is sent through the entire microphone preamp circuitry, including Mercury's custom, massive input transformers, so that the individual character of each preamp comes through.
“The Mercury M76m has been our go-to preamp for pretty much everything since it arrived... it’s very flexible for a vintage style preamp. Used on drums, piano, synths and as a bass DI, the M76m is incredible.”
MERCURY M76m Studio Microphone Amplifiers. 2 Channels. A Faithful recreation of “Telefunken/Siemens V76m”
FAQ: Mercury M72s vs. M76m, Whats the difference?
Both are multipurpose tools for making music. But they do sound very different.
Tone
The Mercury M72s is warm and punchy. The M72s has a thick bottom end, a great push in the mid range and a open airy top end. The M72s performance is great on vocals, bass, drums, acoustic and electric guitars as well as room and overhead applications.
The M76m is warm, open and airy. Compared to the M72s, the M76m is overall more evenly "EQ'd", meaning there is not a push in the low or mids. The M76m shines on vocals, bass and guitars, giving you an amazing control to shape the amplifier's tone. Also, the M76m opens up your room and overhead mics. With 70dB (+/-) of total gain and the choice between high and low input impedance—ribbon mics love the M76m.
Gain
The M72s has 28dB to 58dB with -16 and -28dB input pad, and the M76m has nearly 70dB, with 60dB input gain, plus level control and low impedance selected (+6dB).
MERCURY M76m/1 Studio Microphone Amplifier. 1 CH. (Mono), all the Vintage Tone, Craftsmanship but much more flexible and reliable.
Specifications
Mic Input Impedance: Approx. 2k
Suggested Source Impedance: Approx. 200 ohms
Input Impedance with -28dB Pad: Approx. 4k
DI Input Impedance: 2M ohms
Internal Output Impedance: 30-50 ohms (depends on gain setting)
Suggested Minimum Load: 500 ohms
Max. Mic Signal Input Level (@ 20 Hz): +34dBu with -28dB Pad engaged / +6dBu with Pad not engaged
Max. Output Level: +22dBu
Frequency Response: 20 Hz to 20 kHz +/- 0.5dB
Harmonic Distortion: All musically related low orders of harmonics, with no significant order above 5th.
Mercury Recording Equipment products are not hybrid circuits, emulations of circuits, or "clones". We get the same sound, same tone and same musicality because we use the highest quality parts, all the tubes, and especially all the transformers in our products — like the vintage circuits we are paying homage to.
The Mercury M76m is a faithful recreation of the Vintage Telefunken / Siemens M76m Module. Using 30 years of experience repairing and custom racking the vintage modules at MAL. https://www.MarquetteAudioLabs.com
“ While the vintage V76 modules are ‘sexy’ & known as the ‘holy grail’ of tube mic preamps… they are Sixty years old and have many flaws in their construction design. As well, they are not flexible, nor easy to operate and many parts are no replaceable. In my opinion, the Mercury units are the best way to go now. Mercury offers the same tone, & craftsmanship in a rock solid package with modern features and a better PSU. The Mercury M72s & M76m are built to last longer like the originals were. ” - David Marquette, M.A.L.
Pricing
Mercury M76m
Dual Channel Studio Microphone Amplifier (3U)
LIST PRICE: $8,299.00
STREET PRICE: $7,598.00
Mercury M76m/1
Single Channel Studio Microphone Amplifier (2U)
LIST PRICE: $4,349.00
STREET PRICE: $3,998.00
Mercury M82 - 8:2 Passive Summing Mixer (1U)
LIST PRICE: $1,199.00
US STREET PRICE: $1088.00
